...

How to Repair a 3/4″ Copper Pipe with Milwaukee’s M-12 Pro Press Tool

Today we were in Chelmsford MA and our client had a leaking main water valve from the water main line coming into the house. The old 3/4” stop & waste style valve was leaking and corroded. We had to shut…
3/4” copper pipe repair with Milwaukee M-12 pro press tool

Looking for an efficient and hassle-free way to repair a 3/4″ copper pipe? Look no further than Milwaukee’s M-12 Pro Press Tool! In this blog post, we will guide you through the steps of using this advanced tool to repair copper pipes quickly and easily. With our step-by-step instructions, you’ll see that repairing a 3/4″ copper pipe has never been easier. So, let’s dive in and explore the benefits of Milwaukee’s M-12 Pro Press Tool for copper pipe repair!

How to Repair a 3/4″ Copper Pipe with Milwaukee’s M-12 Pro Press Tool

Introduction

Do you own a home in Chelmsford, MA, and are experiencing issues with a leaking main water valve? Have you noticed that the old 3/4″ stop & waste style valve is not only leaking but corroded? Not to worry, with the advancement of technology and the use of efficient tools, the repair of this leak can be done easily and safely. In this article, we will discuss how to repair a 3/4″ copper pipe with Milwaukee’s M-12 Pro Press Tool.

Steps to Repair a Leaking Main Water Valve

Here are the few steps to follow for repairing a leaking main water valve.

  1. Turn Off the Water Supply: Before you start any repair work, it’s important to turn off the water supply to avoid any potential accidents. You can shut off the water supply before the water meter to stop the flow.
  2. Remove the Old Valve: After turning off the water supply, you can remove the old valve by using a pipe cutter to cut the pipe after the valve. The old valve can then be removed from the pipe.
  3. Install the New Valve: The new valve should be a lead-free Apollo ball-type 1/4 turn shut-off valve, which is now required for most plumbing codes. Make sure to slide the valve onto the copper pipe and secure it in place with the locking mechanism.
  4. Use Milwaukee’s M-12 Pro Press Tool: It is a time saver and reliable tool that can be used for water and hydronic work. It is a safer alternative to the old school soldering method, which could potentially start a fire. Simply attach the Pro Press tool to the valve and copper pipe and press the trigger to crimp the fitting in place.
  5. Turn on the Water Supply: After successfully installing the new valve, you can turn on the water supply to check if there are any leaks.

Video Demonstration

If you’re a visual learner, check out this video demonstration of a professional using Milwaukee’s M-12 Pro Press Tool to repair a 3/4″ copper pipe with a new valve above.

Conclusion

In conclusion, repairing a leaking main water valve can be done easily and safely with the use of efficient tools like Milwaukee’s M-12 Pro Press Tool. By following the steps mentioned above, you can easily replace the old valve with a new one and avoid any potential leaks.

FAQs

  1. Is it necessary to use a lead-free Apollo ball-type 1/4 turn shut-off valve for the repair work in Chelmsford, MA?

Yes, most plumbing codes require the use of lead-free shut-off valves.

  1. Can I use a pipe wrench instead of Milwaukee’s M-12 Pro Press Tool for the repair work?

Yes, a pipe wrench can be used, but it may take longer and be less reliable than the Pro Press tool.

  1. Do I need to shut off the water supply to just the affected area or to the entire house for the repair work?

It’s safest to shut off the water supply to the entire house to avoid any potential accidents.

  1. Is there a risk of starting a fire with the old school soldering method?

Yes, there is a potential risk of starting a fire with the use of open flames during soldering.

  1. Can I do the repair work myself, or should I hire a professional plumber?

If you have the necessary tools and expertise, you can do the repair work yourself. However, it’s always recommended to hire a professional plumber like DiBaccoPlumbing Heating and Cooling for any plumbing work to avoid any potential accidents or mistakes.

Share:

More Posts

DiBaccoPlumbing_EckCreativeMedia_Blog_Design_ECOER

Heat Pump Efficiency vs Outside Temperature

Exploring Heat Pump Efficiency vs Outside Temperature When considering the efficiency of a heat pump, one crucial factor that comes into play is the impact of outside temperature on its performance. The relationship between outside temperature and heat pump efficiency is a critical aspect that directly influences the heating and cooling capabilities of these systems.

DiBacco_Plumbing_Summer_Plumbing_Tips

Summer Plumbing Tips: Keep Your Home Comfortable

As the summer months approach, homeowners in Massachusetts need to ensure their plumbing and HVAC systems are in top condition, including regular maintenance of the chimney and vent systems. to keep their houses cool and comfortable, incorporating radiators as part of the heating system. By implementing various strategies, you can optimize your heating, ventilation, and

DiBaccoPlumbing_Genrac_Standby_Generator_26kW

The Environmental Benefits of Generac Home Standby Generators

Generac home standby generators are not just a solution for power outages; they also play a significant role in benefiting the environment. Let’s take a closer look at how these generators contribute to environmental sustainability. How Do Generac Home Standby Generators Help The Environment? One of the key advantages of Generac home standby generators is

DiBacco_Plumbing_Ultimate_to_Home_Standby_Generator_GENERAC

The Ultimate guide to home standby generators with GENERAC

Home standby generators have become an essential backup power solution for homeowners looking to ensure uninterrupted power supply during outages. One of the key players in the generator market is Generac, which stresses the importance of Generac’s standby generators in ensuring the efficiency and safety of home and business environments. known for its innovative and

Scroll to Top